QuickTrick Alignment Fleet Slide System 15"-21.5" wheels - DIY Wheel Alignment Kit
Suits 15"-21.5" Wheels - 4WD, SUV's, Fleet & Off Road
$795.00Sold Out - Pre-order Available
QuickTrick Fleet System Alignment Kit - 15"-21.5" Wheels. Pt No 90073
QuickTrick Fleet System Wheel Alignment Kit - 15"-21.5" wheels. For vehicles such as 4WD's, SUV's, Trucks, RV's and Off Road vehicles, the QuickTrick Fleet System provides clearance for extended centre caps.
QuickTrick DIY wheel alignment systems are lightweight, completely portable ideal to use at home, racetrack or workshop. Using the QuickTrick alignment tools check your camber, caster and toe to pick up any issues before before any damage is done.
QuickTrick systems are accurate to within 1/10th of a degree on caster and camber. QuickTrick Gauge features a calibration button to zero that will level and compensate for any unlevel surface (with the exception of grass or mud). These systems are the best option for any DIY enthusiast or workshop.
The kit comes complete with
- Dual side set up frame for Caster, Camber & Toe
- One Digital Gauge (batteries included)
- Two Tape Measures
- 8 Attachment Pins w/Red protector caps
- 8 Attachment Magnets
- Allen Key
- Carry Case
- Full Warranty
1. What is the make-up of the QuickTrick system
QuickTrick Alignment systems are manufactured in the USA from US Steel/Cold Rolled tubing and Hot Angle. They are measured, cut, prepped and powder coated in our shop and then squared again and assembled for delivery!
2. How accurate are the QuickTrick digital gauges?
The digital gauge is accurate to within 1/10th of 1 degree. The toe system is as accurate as you read the tape measure. After checking the alignment on some of our vehicles, we have had them rechecked on various Full Scale Electronic Alignment systems and found our setup to be within 0.003 degrees on camber and 1/64 of an inch on toe.
3. How long does it take to set up a QuickTrick alignment system?
Less than 5 minutes. Make sure you use scotch blue to protect your wheels from the sharp edges. All of our systems come with simple and easy to understand instructions and there are plenty of video how to’s on the QuickTrick Alignment site.
4. Do i need special training to check my alignment or adjust it using the QuickTrick system?
NO AND YES! Special training is not needed to check your alignment. If you know the spec’s of your vehicle, checking your alignment can be performed in less than 5 minutes. As far as adjusting your alignment, this differs from one manufacturer to another, but again, we can offer suggestions and tips on any vehicle depending on the outcome you are looking to achieve.
5. Do QuickTrick alignments have to be performed on a perfectly level surface?
NO, Our QuickTrick Gauge features a calibration button to zero that will level and compensate for any unlevel surface. (With the exception of grass or mud.)
6. The QuickTrick alignment system looks so simple, does it really work?
YES, Checking your alignment is not rocket science. Alignment is simply angles and dimensions for caster, camber & toe. Although our system does not look like an $80,000.00 alignment machine, you can achieve the same results in a fraction of the time and cost without going to a shop or taking up all that space if you own a shop. QuickTrick Alignment Systems are affordable and cost effective.
7. Can this system be used on both front and rear?
Yes! The QuickTrick Systems will work on any front or rear wheel drive vehicle. You can use the QuickTrick System for checking and setting alignment for the front and also the rear suspension of your vehicle. You can also check front to rear alignment of your vehicle. Your QuickTrick Alignment system will work on most vehicle makes and models.
Be The First To Review This Product!
Help other American Speed users shop smarter by writing reviews for products you have purchased.